Insert SIM & Memory Card on Your Kyocera DuraForce Pro | AT&T Wireless


Insert SIM & Memory Card: Insert SIM. The device is certified
for P6X, IPX5, IPX8 protection against dust and
water immersion for up to 30 minutes
and up to 6 feet, or approximately
2 meters, of water. Use the notch in the
back bottom-right corner to take the back cover off. Gently flip up the
SIM card cover. Insert the nano SIM card with the gold
contacts facing down and the clipped corner of
the card on the left side. Close the SIM card cover. Insert memory card. With the back cover off
and SIM card cover open, insert the microSD card with
the gold contacts facing down into the slot below
the SIM card slot. SD cards are sold separately and support a memory
capacity of up to 256GB. Close the SIM
and microSD cover. Before replacing
the back cover, make sure the device is free
of any dust or water droplets. Replace the back cover and
push until it clicks into place. ♪AT&T jingle♪

3 thoughts on “Insert SIM & Memory Card on Your Kyocera DuraForce Pro | AT&T Wireless”

Leave a Reply

Your email address will not be published. Required fields are marked *